This post is by a banned member (Smokya) - Unhide
OP 29 April, 2020 - 06:33 AM
Reply
Letting people use my Valorant config
To use, open Openbullet and go to Settings > Openbullet > Sources and add this URL and Key:
http://167.114.77.6:5000/api/configs
91cc07ab9c9b85f4ecfb5653c3c50ae0
Go to Configs tab and click Rescan
The reason I am doing this is to test Openbullet Remote API.
LMK if CPM is good and capture works. It should work for everyone.
This post is by a banned member (BADXYRA) - Unhide
09 April, 2021 - 05:36 PM
Reply
This post is by a banned member (dyaabest) - Unhide
09 May, 2021 - 09:10 PM
Reply
This post is by a banned member (sternje) - Unhide
20 May, 2021 - 07:02 PM
Reply
(29 April, 2020 - 06:33 AM)Smokya Wrote: Show MoreLetting people use my Valorant config
To use, open Openbullet and go to Settings > Openbullet > Sources and add this URL and Key:
http://167.114.77.6:5000/api/configs
91cc07ab9c9b85f4ecfb5653c3c50ae0
Go to Configs tab and click Rescan
The reason I am doing this is to test Openbullet Remote API.
LMK if CPM is good and capture works. It should work for everyone.
fdadfadfa
This post is by a banned member (Oopsyt) - Unhide
10 July, 2021 - 07:06 PM
Reply
[font]really good tnx !!!! [/font]
This post is by a banned member (Aliisbadass) - Unhide
26 September, 2021 - 08:57 PM
Reply
(29 April, 2020 - 06:33 AM)Smokya Wrote: Show MoreLetting people use my Valorant config
To use, open Openbullet and go to Settings > Openbullet > Sources and add this URL and Key:
http://167.114.77.6:5000/api/configs
91cc07ab9c9b85f4ecfb5653c3c50ae0
Go to Configs tab and click Rescan
The reason I am doing this is to test Openbullet Remote API.
LMK if CPM is good and capture works. It should work for everyone.
Tyyyyyy
This post is by a banned member (Strokesz42) - Unhide
05 April, 2022 - 07:23 PM
Reply
This post is by a banned member (vZxmbie) - Unhide
29 July, 2022 - 12:09 AM
Reply
(29 April, 2020 - 06:33 AM)Smokya Wrote: Show MoreLetting people use my Valorant config
To use, open Openbullet and go to Settings > Openbullet > Sources and add this URL and Key:
http://167.114.77.6:5000/api/configs
91cc07ab9c9b85f4ecfb5653c3c50ae0
Go to Configs tab and click Rescan
The reason I am doing this is to test Openbullet Remote API.
LMK if CPM is good and capture works. It should work for everyone.
mhmmmm
