Supreme PowerMTA Install & Setup

[1]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:


Loooking to how it works.

Thanks for sharing

[4]

is this legit!?

[2]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:

all power mta links are down

[6]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:

thansk broooo

[1]

New to powermta. I hope this tutorial will be good.

[49]

xx bro think

[6]

thanx

[1]

ty btw