Call of Duty Modern Warfare / Warzone hacks

[21]

tthanks

Show ContentSpoiler:

Warzone Zeta

https://www.skycheats.com/
23 Hours left / day pass
enjoy
 
[align=start] 

 

Zeta How to use:
 

-Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.
 

Follow this video-guide to know HOW TO:

 

 

 

FEW THINGS THAT YOU NEED TO KNOW:

*As the cheat information mentions, this cheat does require having the following: Virtualization Enabled, Secure Boot Disabled otherwise you will receive ERRORS AT THE COMMAND PROMPT

*This cheat requires Battle net being closed before injection as a security measure. You can open it once the injection is completed and read to open the game

*Use ONE PIN CODE per customer. If you change your PIN code, the HWID will also change!! Beware!! Explained more on the manual.

 

*This cheat comes with self spoofer for your use.

*For this testing we will run the cheat in a game Borderless mode and a resolution of 1920x1080

 

Steps to be done before using the cheat:

 

 

Virtualization Enabled: There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology.

 

 

Step 1: Extract and open the Zeta loader as an administrator.

Notes: Be sure to have Battle NET closed on this stage or the loader will not continue and self close.

Step 2: A command prompt should become visible. From here paste the serial key you have obtained from the shop and then press Enter.

 

*The loader will request you now to create a "PIN". It has to be a number generated by yourself (6 numbers. Like the example:301522). This PIN will determine what HWID are you going to set to the spoofer.

It is important to remember:

- If you set a PIN, be sure to always use the SAME PIN each injection.

- In case the spoofer cause you issues or not willing or in a need to use it, set as pin the number "0". It will then skip this step.

--> Once you have set your PIN, CLICK ON THE COMMAND PROMPT AND PRESS ENTER TO CONTINUE.

 

*The loader will confirm your operation with the following message. and then remain on standby until you proceed with the next step.

 

Step 3. Open BattleNet and Select the region you desire and then click on Play to begin the game.

 

 

Step 4. Once you reach the game lobby / warzone or multiplayer, press the BUTTON F5 one time to begin the injection to the game. The menu should appear to you on the left side of the screen. Operate with it the button DELETE to open/close it and clicking on the options to customize to your liking.

 

 

Few tips regarding the options - Understanding the meaning of each option.

 

Max FOV: It is the FOV setting for target lock (the higher, the less close the gun angle has to be to the target for the aimbot to activate); The aimbot will use this setting to alter the FOV dynamically based on the enemy's distance. (I.e. if the enemy is right in front of you, the FOV will basically take up the whole screen. If they are 1000m away , the FOV becomes tiny so that you have to aim close to the enemy target so that the aimbot understands that's the enemy you want to snipe). 

Min FOV: It is just a setting to tell the aimbot that it has reached close enough to the target bone and to not bother sending more mouse input events. It's to help prevent mouse stutter. (By default this parameter is not needed to change.)

Max Distance: The measure is done in meters, where the aimbot reacts

Speed: It is (pixels/sec X 10) , linked to the lock delay option.

Lock Delay: Affects the acceleration time from 0 to max speed (determine by the speed slider). The aimbot will aim instantly but accelerate from 0-Max speed instead of not aiming at all)

Smoothing Radius (a radius in pixels around the target): Tells the aimbot when to slow down when it reaches close enough to the target bone. (Smoothing off/smoothing 0 can lead to mouse stutter). If you want a minimum smoothing then you should try a setting of at least 5)

Auto Lock: (off = aimbot will aim only at the first target selected until it either becomes invisible or you let go of aim key) (on = aimbot can change targets instantly by selecting the best target based on FOV)

Gravity Constant: affects the bullet drop algorithm. should not be changed unless the user finds that when sniping long distance the bullets are either too high or too low)

[/align]
[align=start] [/align]

[16]

thanks hope this still works

[44]

aefegfgdfggfdfg

[152]

Cheers

[102]

Show ContentSpoiler:

Warzone Zeta

https://www.skycheats.com/
23 Hours left / day pass
enjoy
 
[align=start] 

 

Zeta How to use:
 

-Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.
 

Follow this video-guide to know HOW TO:

 

 

 

FEW THINGS THAT YOU NEED TO KNOW:

*As the cheat information mentions, this cheat does require having the following: Virtualization Enabled, Secure Boot Disabled otherwise you will receive ERRORS AT THE COMMAND PROMPT

*This cheat requires Battle net being closed before injection as a security measure. You can open it once the injection is completed and read to open the game

*Use ONE PIN CODE per customer. If you change your PIN code, the HWID will also change!! Beware!! Explained more on the manual.

 

*This cheat comes with self spoofer for your use.

*For this testing we will run the cheat in a game Borderless mode and a resolution of 1920x1080

 

Steps to be done before using the cheat:

 

 

Virtualization Enabled: There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology.

 

 

Step 1: Extract and open the Zeta loader as an administrator.

Notes: Be sure to have Battle NET closed on this stage or the loader will not continue and self close.

Step 2: A command prompt should become visible. From here paste the serial key you have obtained from the shop and then press Enter.

 

*The loader will request you now to create a "PIN". It has to be a number generated by yourself (6 numbers. Like the example:301522). This PIN will determine what HWID are you going to set to the spoofer.

It is important to remember:

- If you set a PIN, be sure to always use the SAME PIN each injection.

- In case the spoofer cause you issues or not willing or in a need to use it, set as pin the number "0". It will then skip this step.

--> Once you have set your PIN, CLICK ON THE COMMAND PROMPT AND PRESS ENTER TO CONTINUE.

 

*The loader will confirm your operation with the following message. and then remain on standby until you proceed with the next step.

 

Step 3. Open BattleNet and Select the region you desire and then click on Play to begin the game.

 

 

Step 4. Once you reach the game lobby / warzone or multiplayer, press the BUTTON F5 one time to begin the injection to the game. The menu should appear to you on the left side of the screen. Operate with it the button DELETE to open/close it and clicking on the options to customize to your liking.

 

 

Few tips regarding the options - Understanding the meaning of each option.

 

Max FOV: It is the FOV setting for target lock (the higher, the less close the gun angle has to be to the target for the aimbot to activate); The aimbot will use this setting to alter the FOV dynamically based on the enemy's distance. (I.e. if the enemy is right in front of you, the FOV will basically take up the whole screen. If they are 1000m away , the FOV becomes tiny so that you have to aim close to the enemy target so that the aimbot understands that's the enemy you want to snipe). 

Min FOV: It is just a setting to tell the aimbot that it has reached close enough to the target bone and to not bother sending more mouse input events. It's to help prevent mouse stutter. (By default this parameter is not needed to change.)

Max Distance: The measure is done in meters, where the aimbot reacts

Speed: It is (pixels/sec X 10) , linked to the lock delay option.

Lock Delay: Affects the acceleration time from 0 to max speed (determine by the speed slider). The aimbot will aim instantly but accelerate from 0-Max speed instead of not aiming at all)

Smoothing Radius (a radius in pixels around the target): Tells the aimbot when to slow down when it reaches close enough to the target bone. (Smoothing off/smoothing 0 can lead to mouse stutter). If you want a minimum smoothing then you should try a setting of at least 5)

Auto Lock: (off = aimbot will aim only at the first target selected until it either becomes invisible or you let go of aim key) (on = aimbot can change targets instantly by selecting the best target based on FOV)

Gravity Constant: affects the bullet drop algorithm. should not be changed unless the user finds that when sniping long distance the bullets are either too high or too low)

[/align]
[align=start] [/align]

Yo thats crazey g

[40]

SDGSDGSDGSDGSDGSDGSD

[38]

yo let me use this hack i need for streaming purposes

[42]

Nice work