OP 05 August, 2023 - 01:12 PM
(This post was last modified: 16 August, 2023 - 08:51 AM by darkname01. Edited 1 time in total.)
/////////////////////////////////////////////////////////////////////////////////////////////
Contact me
Whatsapp: +1918-860-0312
Telegram: @sherbydr
Operation of the Bot Here: https://www.youtube.com/watch?v=YN3XQqUNUwI
Download HERE:
/////////////////////////////////////////////////////////////////////////////////////////////
Instructions for using the Spotify Bot
The Spotify Bot is a tool that allows you to automate the playback of Spotify playlists on multiple Android devices, either through emulators or cell phones connected via USB or via adb connection over WiFi. Below, we explain how to set up and use the bot correctly:
Configuration of ini files.
Configure the devices.ini file and, within it, place each device name on a separate line separated by a comma.
For example:
emulator-5556,emulator-5558,emulator-5560,emulator-5562,emulator-5564,emulator-5566,emulator-5568
Note: The last device in the list should not have a comma at the end of the line.
Save the devices.ini file with the list of configured devices.
Configure the playlist.ini file and, within it, place each Playlist URL in the same order as you see them in the file.
For example:
https://open.spotify.com/playlist/5se6Pa...gBCM23hWM0
https://open.spotify.com/playlist/6Z2uDC...INbFKNz5QH
https://open.spotify.com/playlist/6bLQN5...XmrEm2A9ZO
https://open.spotify.com/playlist/6ICuNO...StzDwdY6FR
https://open.spotify.com/playlist/2gNPIl...4kAc2X8tOl
https://open.spotify.com/playlist/2aX4Yt...4y3gZ7QnGI
https://open.spotify.com/playlist/4ur9bU...uYDxaAETQC
Note: Remove any spaces at the end of each URL.
Save the playlist.ini file with the list of configured URLs.
Configure the license.ini file and, within it, place your license to use it. In case you don't have one, contact me via Telegram: @sherbydr or Whatsapp: +1918-860-0312, and I will send you a trial license for a few hours. IMPORTANT: have everything set up before activating it to make the most of its use!
For example:
license = HNS-OGLE-XZI-BHMV
Note: Remove any spaces at the end of the license.
Save the license.ini file and you're done.
Usage with Emulators or Android Devices connected via USB:
Identify the device names: To start, you must identify the device names for each emulator or Android device connected via USB. Normally, these names are similar to the following:
emulator-5554
emulator-5556
emulator-5558
emulator-5560
emulator-5562
emulator-5564
emulator-5566
emulator-5568
Usage with adb connection over WiFi:
Install the adb service on your PC: First, install the adb service on your PC by following the instructions in this video: https://www.youtube.com/watch?v=KTYnq5dEJBs
Assign a static IP to each Android device: Next, assign a static IP address to each Android device. You can learn how to do it by following this video: https://www.youtube.com/watch?v=AA21TvZVXLE
Activate USB debugging and WiFi debugging mode on the devices: Once the static IPs are assigned, make sure to activate the USB debugging and WiFi debugging mode within each Android device. You can follow the instructions in this video: https://www.youtube.com/watch?v=_JjpbufTMew
Connect devices via USB and then via WiFi: Connect each Android device individually via USB and run the following command in the CMD console (replace the appropriate IP and port for each device):
adb connect 10.0.0.216:5555
adb connect 10.0.0.209:5555
adb connect 10.0.0.212:5555
adb connect 10.0.0.210:5555
adb connect 10.0.0.134:5555
adb connect 10.0.0.135:5555
adb connect 10.0.0.136:5555
adb connect 10.0.0.137:5555
adb connect 10.0.0.138:5555
adb connect 10.0.0.145:5555
NOTE: You can copy all of them at once and paste them into the console to connect them one by one.
General Requirements:
To use the Spotify Bot correctly, make sure to meet the following requirements:
Good Internet connection: For optimal performance, you need to have a stable and fast Internet connection.
Spotify Premium: You must have a Spotify Premium account and be logged in to the application.
Spotify settings: Make sure you have enabled the option to open playlist links directly in the Spotify application and not in the mobile browser.
Same network for all devices: It is essential that all devices are connected to the same network as the PC where you are using the Spotify Bot.
With these instructions, you will be ready to use the Spotify Bot and enjoy automated playback of your playlists on multiple Android devices. Have fun with your music!
For more information:
Contact me
Whatsapp: +1918-860-0312
Telegram: @sherbydr
Contact me
Whatsapp: +1918-860-0312
Telegram: @sherbydr
Operation of the Bot Here: https://www.youtube.com/watch?v=YN3XQqUNUwI
Download HERE:
/////////////////////////////////////////////////////////////////////////////////////////////
Instructions for using the Spotify Bot
The Spotify Bot is a tool that allows you to automate the playback of Spotify playlists on multiple Android devices, either through emulators or cell phones connected via USB or via adb connection over WiFi. Below, we explain how to set up and use the bot correctly:
Configuration of ini files.
Configure the devices.ini file and, within it, place each device name on a separate line separated by a comma.
For example:
emulator-5556,emulator-5558,emulator-5560,emulator-5562,emulator-5564,emulator-5566,emulator-5568
Note: The last device in the list should not have a comma at the end of the line.
Save the devices.ini file with the list of configured devices.
Configure the playlist.ini file and, within it, place each Playlist URL in the same order as you see them in the file.
For example:
https://open.spotify.com/playlist/5se6Pa...gBCM23hWM0
https://open.spotify.com/playlist/6Z2uDC...INbFKNz5QH
https://open.spotify.com/playlist/6bLQN5...XmrEm2A9ZO
https://open.spotify.com/playlist/6ICuNO...StzDwdY6FR
https://open.spotify.com/playlist/2gNPIl...4kAc2X8tOl
https://open.spotify.com/playlist/2aX4Yt...4y3gZ7QnGI
https://open.spotify.com/playlist/4ur9bU...uYDxaAETQC
Note: Remove any spaces at the end of each URL.
Save the playlist.ini file with the list of configured URLs.
Configure the license.ini file and, within it, place your license to use it. In case you don't have one, contact me via Telegram: @sherbydr or Whatsapp: +1918-860-0312, and I will send you a trial license for a few hours. IMPORTANT: have everything set up before activating it to make the most of its use!
For example:
license = HNS-OGLE-XZI-BHMV
Note: Remove any spaces at the end of the license.
Save the license.ini file and you're done.
Usage with Emulators or Android Devices connected via USB:
Identify the device names: To start, you must identify the device names for each emulator or Android device connected via USB. Normally, these names are similar to the following:
emulator-5554
emulator-5556
emulator-5558
emulator-5560
emulator-5562
emulator-5564
emulator-5566
emulator-5568
Usage with adb connection over WiFi:
Install the adb service on your PC: First, install the adb service on your PC by following the instructions in this video: https://www.youtube.com/watch?v=KTYnq5dEJBs
Assign a static IP to each Android device: Next, assign a static IP address to each Android device. You can learn how to do it by following this video: https://www.youtube.com/watch?v=AA21TvZVXLE
Activate USB debugging and WiFi debugging mode on the devices: Once the static IPs are assigned, make sure to activate the USB debugging and WiFi debugging mode within each Android device. You can follow the instructions in this video: https://www.youtube.com/watch?v=_JjpbufTMew
Connect devices via USB and then via WiFi: Connect each Android device individually via USB and run the following command in the CMD console (replace the appropriate IP and port for each device):
adb connect 10.0.0.216:5555
adb connect 10.0.0.209:5555
adb connect 10.0.0.212:5555
adb connect 10.0.0.210:5555
adb connect 10.0.0.134:5555
adb connect 10.0.0.135:5555
adb connect 10.0.0.136:5555
adb connect 10.0.0.137:5555
adb connect 10.0.0.138:5555
adb connect 10.0.0.145:5555
NOTE: You can copy all of them at once and paste them into the console to connect them one by one.
General Requirements:
To use the Spotify Bot correctly, make sure to meet the following requirements:
Good Internet connection: For optimal performance, you need to have a stable and fast Internet connection.
Spotify Premium: You must have a Spotify Premium account and be logged in to the application.
Spotify settings: Make sure you have enabled the option to open playlist links directly in the Spotify application and not in the mobile browser.
Same network for all devices: It is essential that all devices are connected to the same network as the PC where you are using the Spotify Bot.
With these instructions, you will be ready to use the Spotify Bot and enjoy automated playback of your playlists on multiple Android devices. Have fun with your music!
For more information:
Contact me
Whatsapp: +1918-860-0312
Telegram: @sherbydr
