Supreme PowerMTA Install & Setup

[1]

merci

[5]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:

Install PowerMTA 4.5 download link for license?

[8]

Very appreciable but I would like to know the difference between version 4.5 and 5? Is there a difference on the reception rate?

[112]

thanks so much for this

[19]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:

thank u sooo much

[13]

To install PowerMTA 4.5, you will need to buy a server
with Сentos 6.0 operating system (x86-64 or x64)

Minimum requirements: 1Gb RAM, 10Gb disk,
preferably on SSD. It is also desirable that in the DNS zone of the domain all the records (type A and MX) necessary for working with this server were registered .

*Additional commands for working with the server

reboot- Restarting the server from the console

Additional commands for working with PMTA:

service pmta reload- Restarting the PMTA config


service pmta restart- Restarting the PMTA

service pmta stop- Stopping the PMTA


pmta pause queue /- Pause sending PMTA


pmta resume queue /- Start sending the PMTA


pmta delete —queue=/- Delete the PMTA distribution queue

Install PowerMTA 4.5:

Is PMTA included?

[14]

hoSZZZZZZZZ

[44]

thins content contains download link ?