Navigation X
ALERT
Click here to register with a few steps and explore all our cool stuff we have to offer!



 125551

[VALORANT] NORECOIL RECODE | WORKING | UNDETECTED

by MarilynManson - 24 April, 2020 - 08:47 PM
This post is by a banned member (creed6969) - Unhide
creed6969  
Registered
25
Posts
12
Threads
4 Years of service
#57
finna check this out
This post is by a banned member (markgexrge) - Unhide
1
Posts
0
Threads
4 Years of service
#58
fingers crossed xx
This post is by a banned member (R5B) - Unhide
R5B  
Registered
8
Posts
0
Threads
4 Years of service
#59
(24 April, 2020 - 08:47 PM)MarilynManson Wrote: Show More
before you download this script download this : https://www.autohotkey.com


AHK NoRecoil Recode - Best Settings

This is a recode of KratosHaynes NoRecoil script which can be found here: Valorant no recoil ahk

instead of continuously pulling the mouse down at the same speed it changes between 5 different speeds after time. This will make it more precise.
If the whole magazine has been shot, the crosshair will be reset to the previous position (Only works reliable for the Vandal and Phantom right now).
I have changed some sleep timers and removed autofire so the whole magazine (30 shots) will be fired about 1.5 seconds faster than with the original norecoil script.

comparison: 
https://youtu.be/BQ-13ZK2dF8

I also use this NoRecoil Script in my Coloraimbot-Triggerbot-NoRecoil Recode which you can find here: AHK Coloraimbot and Triggerbot - in one script

Press F2 to start the Script - Press F1 to exit

Set Ingame Sensitivity to 1

niceee
This post is by a banned member (SuqAWoof) - Unhide
SuqAWoof  
Registered
1
Posts
0
Threads
4 Years of service
#60
(24 April, 2020 - 08:47 PM)MarilynManson Wrote: Show More
before you download this script download this : https://www.autohotkey.com
 
just pure lovely, good job my friend SleepingPepe SleepingPepe SleepingPepe
AHK NoRecoil Recode - Best Settings

This is a recode of KratosHaynes NoRecoil script which can be found here: Valorant no recoil ahk

instead of continuously pulling the mouse down at the same speed it changes between 5 different speeds after time. This will make it more precise.
If the whole magazine has been shot, the crosshair will be reset to the previous position (Only works reliable for the Vandal and Phantom right now).
I have changed some sleep timers and removed autofire so the whole magazine (30 shots) will be fired about 1.5 seconds faster than with the original norecoil script.

comparison: 
https://youtu.be/BQ-13ZK2dF8

I also use this NoRecoil Script in my Coloraimbot-Triggerbot-NoRecoil Recode which you can find here: AHK Coloraimbot and Triggerbot - in one script

Press F2 to start the Script - Press F1 to exit

Set Ingame Sensitivity to 1
very good job my brudda
This post is by a banned member (bobgob) - Unhide
bobgob  
Registered
10
Posts
0
Threads
4 Years of service
#61
good job
This post is by a banned member (stormh4wk) - Unhide
stormh4wk  
Registered
2
Posts
0
Threads
4 Years of service
#62
(24 April, 2020 - 08:47 PM)MarilynManson Wrote: Show More
Not working.. update or delete
Wooow Wooow Wooow not working..delete it
This post is by a banned member (alitaah) - Unhide
alitaah  
Registered
27
Posts
0
Threads
4 Years of service
#63
(24 April, 2020 - 08:47 PM)MarilynManson Wrote: Show More
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwaddddbefore you download this script download this : https://www.autohotkey.com


AHK NoRecoil Recode - Best Settings

This is a recode of KratosHaynes NoRecoil script which can be found here: Valorant no recoil ahk

instead of continuously pulling the mouse down at the same speed it changes between 5 different speeds after time. This will make it more precise.
If the whole magazine has been shot, the crosshair will be reset to the previous position (Only works reliable for the Vandal and Phantom right now).
I have changed some sleep timers and removed autofire so the whole magazine (30 shots) will be fired about 1.5 seconds faster than with the original norecoil script.

comparison: 
https://youtu.be/BQ-13ZK2dF8

I also use this NoRecoil Script in my Coloraimbot-Triggerbot-NoRecoil Recode which you can find here: AHK Coloraimbot and Triggerbot - in one script

Press F2 to start the Script - Press F1 to exit

Set Ingame Sensitivity to 1

cooooll io
This post is by a banned member (fakeperson111) - Unhide

Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
or
Sign in
Already have an account? Sign in here.


Forum Jump:


Users browsing this thread: 1 Guest(s)