Release Intuit TurboTax 2021 (US - Any Edition + Unltd States) with Manual Crack Instructions

[1]

Thanks!

[1]

Thank you!

[40]

doesn't work

[16]

I just bought the TT2023 Deluxe. I'll be posting the link here in a bit.

---

I just bought the TT2023 Deluxe. I'll be posting the link here in a bit.

---

Any update on TT23 download?

I just bought the TT2023 Deluxe. I'll be posting the link here in a bit.

---

Any update on TT23 download?

I just bought the TT2023 Deluxe. Installed and tried the old instructions. They still work.

---

I just bought the TT2023 Deluxe. Installed and tried the old instructions. They still work.

I just bought the TT2023 Deluxe. Installed and tried the old instructions. They still work. I'll be posting the link here in a bit.

[1]

Turbo Tax 2023 is cracked just like it was previously for Turbo Tax 2022 & 2021. The main difference is the line numbers have been changed. I haven't done the extra states yet. I'm working on it. Here is what I have for 2023.

Now TT H&B 2023 is good to go! 

Update for unlimited free states (if income is listed in the return) Note: Only works when "click to see amount" shows in the program:
S.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\TurboTax\Individual 2023\64bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open 
S.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu 
S.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.TaxDataModel" and click on it. A green item called "TaxReturnStates" will show in the list, click on it to expand. 
S.4. A bunch of orange names will now show. Find the one called "AddStateToReturnByFormsetId(string) : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." 
S.5. A window with code will open. Within the code, modify LINE 22 to read  bool flag = true; 
S.5.1 (Thanks Funtik78 -NOTE: Only do this if the above instruction not working!) Additional modify the following - Line 23 : bool flag2 = true; Line 30 : flag4 = true; 
S.6. Once you modify the line, at the bottom of the window, click "Compile" and the window will close. 

S.7. Continue from Step 16 above. 
This change will prompt you for all states with income in your return if you'd like to use your free state. Enjoy unlimited free states! 


Update if you receive state screen asking for $40-$45 Payment:
ONLY DO THIS IF YOU HAVE USED YOUR FIRST STATE AND ARE TRYING TO GET A SECOND AND GET A SCREEN ASKING FOR $$ 
SP.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\TurboTax \Individual 2023\64bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open SP.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu SP.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.Entitlement" and click on it. A green item called "EntitlementService" will show in the list, click on it to expand. SP.4. A bunch of orange names will now show. Find the one called "IsStateEntitles() : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." SP.5. A window with code will open. Within the code, DELETE LINES 16-20 (the whole if else 
statement), then enter in return true;  (your method will now only have the return true in it) 
SP.6. Once you delete the lines and add the line, at the bottom of the window, click "Compile" and 
the window will close. 
SP.7. Continue from Step 16 above. 

SP.8. Once you do this change, open TT again and click to continue the return 
SP.9. On window lets work on your state return ... click continue 
SP.10. You may need to click around in a circle but eventually at the top next to the state name you 
should now see your other state name, click on the name and itll take you to fill it out! 

Enjoy not paying $40-45 for more states :) 


Update for FREE UNLIMITED STATE FILING:
ONLY DO THIS ONCE YOU ARE DONE WITH ALL STATE AND FEDERAL RETURNS AND ARE READY TO FILE!!! 
SF.1. Once done with all federal and state returns, save and close TT. SF.2. Complete the following: 
SF.2.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files (x86)\TurboTax\Individual 2021\32bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open SF.2.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu SF.2.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.Entitlement" and click on it. A green item called "EntitlementPresenter" will show in the list, click on it to expand. SF.2.4. A bunch of orange names will now show. Find the one called "PurchaseStateEFile() : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." SF.2.5. A window with code will open. Within the code, DELETE LINES 31-37 (the whole if else statement) SF.2.6. Once you delete the lines, at the bottom of the window, click "Compile" and the window will close. SF.2.7. Continue from Step 16 above. 
SF.3. You then have the window that shows efile your federal return for free ... click continue SF.4. Select returns you ready to efile click efile for all ... click continue SF.5. Enter your information for efile ... click continue SF.6. Now finish up/review filing info for state return ... click continue SF.7. Save the preview of your taxes if you want ... click continue SF.8. Enter email for status on returns ... click continue SF.9. Payment will show some amount depending on number of states ... ignore it, DO NOT ADD AUDIT DEFENSE ... click continue SF.10. How do you want to pay ... click PAY WITH CREDIT CARD SF.11. Window to pay is now gone (instead of prompting you for $$) ... jumps to transmit returns ... click the button to transmit SF.12. Return is transmitted ... click continue SF.13. Finish the rest of the prompts how you like, the return is transmitted and you will receive an email! 
Enjoy not paying $20 per state to efile!

---

Turbo Tax 2023 is cracked just like it was previously for Turbo Tax 2022 & 2021. The main difference is the line numbers have been changed. I haven't done the extra states yet. I'm working on it. Here is what I have for 2023.

Now TT H&B 2023 is good to go! 

Update for unlimited free states (if income is listed in the return) Note: Only works when "click to see amount" shows in the program:
S.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\TurboTax\Individual 2023\64bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open 
S.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu 
S.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.TaxDataModel" and click on it. A green item called "TaxReturnStates" will show in the list, click on it to expand. 
S.4. A bunch of orange names will now show. Find the one called "AddStateToReturnByFormsetId(string) : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." 
S.5. A window with code will open. Within the code, modify LINE 22 to read  bool flag = true; 
S.5.1 (Thanks Funtik78 -NOTE: Only do this if the above instruction not working!) Additional modify the following - Line 23 : bool flag2 = true; Line 30 : flag4 = true; 
S.6. Once you modify the line, at the bottom of the window, click "Compile" and the window will close. 

S.7. Continue from Step 16 above. 
This change will prompt you for all states with income in your return if you'd like to use your free state. Enjoy unlimited free states! 


Update if you receive state screen asking for $40-$45 Payment:
ONLY DO THIS IF YOU HAVE USED YOUR FIRST STATE AND ARE TRYING TO GET A SECOND AND GET A SCREEN ASKING FOR $$ 
SP.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\TurboTax \Individual 2023\64bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open SP.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu SP.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.Entitlement" and click on it. A green item called "EntitlementService" will show in the list, click on it to expand. SP.4. A bunch of orange names will now show. Find the one called "IsStateEntitles() : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." SP.5. A window with code will open. Within the code, DELETE LINES 16-20 (the whole if else 
statement), then enter in return true;  (your method will now only have the return true in it) 
SP.6. Once you delete the lines and add the line, at the bottom of the window, click "Compile" and 
the window will close. 
SP.7. Continue from Step 16 above. 

SP.8. Once you do this change, open TT again and click to continue the return 
SP.9. On window lets work on your state return ... click continue 
SP.10. You may need to click around in a circle but eventually at the top next to the state name you 
should now see your other state name, click on the name and itll take you to fill it out! 

Enjoy not paying $40-45 for more states :) 


Update for FREE UNLIMITED STATE FILING:
ONLY DO THIS ONCE YOU ARE DONE WITH ALL STATE AND FEDERAL RETURNS AND ARE READY TO FILE!!! 
SF.1. Once done with all federal and state returns, save and close TT. SF.2. Complete the following: 
SF.2.1. In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files (x86)\TurboTax\Individual 2021\32bit" and click on "Intuit.Ctg.Wte.Service.dll" and click Open SF.2.2. The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu SF.2.3. Find the yellow item labeled "Intuit.Ctg.Wte.Service.Entitlement" and click on it. A green item called "EntitlementPresenter" will show in the list, click on it to expand. SF.2.4. A bunch of orange names will now show. Find the one called "PurchaseStateEFile() : bool" and right click on it. Click on the option that says "Edit Method (C#) ..." SF.2.5. A window with code will open. Within the code, DELETE LINES 31-37 (the whole if else statement) SF.2.6. Once you delete the lines, at the bottom of the window, click "Compile" and the window will close. SF.2.7. Continue from Step 16 above. 
SF.3. You then have the window that shows efile your federal return for free ... click continue SF.4. Select returns you ready to efile click efile for all ... click continue SF.5. Enter your information for efile ... click continue SF.6. Now finish up/review filing info for state return ... click continue SF.7. Save the preview of your taxes if you want ... click continue SF.8. Enter email for status on returns ... click continue SF.9. Payment will show some amount depending on number of states ... ignore it, DO NOT ADD AUDIT DEFENSE ... click continue SF.10. How do you want to pay ... click PAY WITH CREDIT CARD SF.11. Window to pay is now gone (instead of prompting you for $$) ... jumps to transmit returns ... click the button to transmit SF.12. Return is transmitted ... click continue SF.13. Finish the rest of the prompts how you like, the return is transmitted and you will receive an email! 
Enjoy not paying $20 per state to efile!

---

Updated Jan. 2024 (instructions for Turbotax 2023 only) 
Instructions: 
1. 
Download the archive and extract contents. 

2. 
Install TT H&B ETC. 2023 from and get the latest updates during setup. When it restarts and asks for activation, close the window. Open the program from shortcut again, and when it asks for activation, close the window. 

3. 
Download dnSpy-net###.zip from: 

4. 
Extract dnSpy-net###.zip to a folder and run dnSpy.exe as administrator! (If you don't, it will not work) 

The first major step is to make sure that we are picking the version of TT that we want (Home and Business or Premier or Deluxe). This is necessary since it will default to Basic otherwise. 

5. 
In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\TurboTax\Individual 
2023\64bit" and click on "Intuit.Ctg.Wte.Service.Interface.dll" and click Open 


6. 
The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the 
left pane to expand the item. A purple item will show, click on the arrow to expand the menu 


7. 
Find the yellow item labeled "Intuit.Ctg.Wte.Service.ProductConfiguration" and click on it. A green 
item called "ProductConfigurationProperties" will show, right click on it and choose "Edit Class (C#)" 



8.1. A window will open. You need to change two values in here. First, change LINE 14 to 
be: public string productSKU { get; set; } = VariantConst.EditionNames.HomeAndBusiness.ToString( 
); 

8.2. Second, change LINE 74 to 
be: public string baseSKU { get; set; } = VariantConst.EditionNames.HomeAndBusiness.ToString(); 
8.note: You can pick other versions of TT by changing the text in the two lines "HomeAndBusiness" 
to ONE of the following: "Basic" "Premier" "Deluxe" "HomeAndBusiness" 
9.Once you have set the two lines, at the bottom of the window, click "Compile" and the window will 
close 

The second major step is to disable the activation request 
10. 
In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\ TurboTax\Individual 2023\64bit" and click on "Intuit.Ctg.Wte.UseCase.dll" and click Open 

11. 
The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu 

12. 
Find the yellow item labeled "Intuit.Ctg.Wte.UseCase.Startup" and click on it. A green item called "LifeCycleUseCaseController" will show, click on it to expand. 

13. 
A bunch of orange names will now show. Find the one called "PerformStartup( <stuff in here> ) : void" and right click on it. Click on the option that says "Edit Method (C#) ..." 

14. 
A window with code will open. Within the code, delete line 144 which has the following: this.ShowActivationDialogWindow(splashWindow); 

15. 
Once you delete the line 144, at the bottom of the window, click "Compile" and the window will close. 

16. 
In the main window of dnSpy, click on File -> Save Module. A window will open, click on "OK" 

17. 
Click on File -> Close/Exit the dnSpy program. If it says there is unsaved file, save it. Then once dnSpy is closed run TT H&B 2023. Your product is now "Activated" 


Now TT H&B 2023 is good to go! 




Crack for Turbo Tax 2023

8.2. Second, change LINE 74 to 
be: public string baseSKU { get; set; } = VariantConst.EditionNames.HomeAndBusiness.ToString(); 
8.note: You can pick other versions of TT by changing the text in the two lines "HomeAndBusiness" 
to ONE of the following: "Basic" "Premier" "Deluxe" "HomeAndBusiness" 
9.Once you have set the two lines, at the bottom of the window, click "Compile" and the window will 
close 

The second major step is to disable the activation request 
10. 
In the dnSpy program, click on File -> Open. Navigate to "C:\Program Files\ TurboTax\Individual 2023\64bit" and click on "Intuit.Ctg.Wte.UseCase.dll" and click Open 

11. 
The file will open and be highlighted in the left pane. Click on the arrow next to the file name in the left pane to expand the item. A purple item will show, click on the arrow to expand the menu 

12. 
Find the yellow item labeled "Intuit.Ctg.Wte.UseCase.Startup" and click on it. A green item called "LifeCycleUseCaseController" will show, click on it to expand. 

13. 
A bunch of orange names will now show. Find the one called "PerformStartup( <stuff in here> ) : void" and right click on it. Click on the option that says "Edit Method (C#) ..." 

14. 
A window with code will open. Within the code, delete line 144 which has the following: this.ShowActivationDialogWindow(splashWindow); 

15. 
Once you delete the line 144, at the bottom of the window, click "Compile" and the window will close. 

16. 
In the main window of dnSpy, click on File -> Save Module. A window will open, click on "OK" 

17. 
Click on File -> Close/Exit the dnSpy program. If it says there is unsaved file, save it. Then once dnSpy is closed run TT H&B 2023. Your product is now "Activated" 


Now TT H&B 2023 is good to go!

[16]

I just bought the TT2023 Deluxe. Installed and tried the old instructions. They still work. Can someone tell where to leave the link to download?

---

Any update on TT23 download?

https://download.esd.synnex.com/59745/20...nloadx.exe?

---

 

 

[8]

Can someone help upload TT23, please?

---

Can anyone share TT23 please?

[1]

Thanks for the software, it's appreciated!